Fox

Published

A small fox built from LEGO® bricks, standing with its tail out, in 18 steps and 102 pieces.

Free building instructions for small models built from LEGO® bricks.

Download the PDF

A small orange fox built from LEGO® bricks, with a white muzzle and chest, black feet and a white tail tip, standing with its head turned to the left.

Steps

  1. Step 1 of 18: Start the body with an orange 1 x 3 plate held studs down, and add the parts to its underside.

    Start the body with an orange 1 x 3 plate held studs down, and add the parts to its underside.

  2. Step 2 of 18: Turn it over, studs up, and add the bricks with studs on the side.

    Turn it over, studs up, and add the bricks with studs on the side.

  3. Step 3 of 18: Lay it down the way the fox stands, and add the plates and slopes on top.

    Lay it down the way the fox stands, and add the plates and slopes on top.

  4. Step 4 of 18
  5. Step 5 of 18
  6. Step 6 of 18: Seen from below: add the white parts and the black brick at the front.

    Seen from below: add the white parts and the black brick at the front.

  7. Step 7 of 18: Turn it back up and add the plates and curved slopes at the front.

    Turn it back up and add the plates and curved slopes at the front.

  8. Step 8 of 18
  9. Step 9 of 18: Build the tail at the back.

    Build the tail at the back.

  10. Step 10 of 18: Add the four legs underneath.

    Add the four legs underneath.

  11. Step 11 of 18: Build the head on its own, starting with its base.

    Build the head on its own, starting with its base.

  12. Step 12 of 18
  13. Step 13 of 18: Seen from the back: add the plates and bricks at the back of the head.

    Seen from the back: add the plates and bricks at the back of the head.

  14. Step 14 of 18: Seen from below: add the white chin plates.

    Seen from below: add the white chin plates.

  15. Step 15 of 18: Turn it back up and add the eyes and the tiles on top.

    Turn it back up and add the eyes and the tiles on top.

  16. Step 16 of 18: Seen from the back again: add the plates at the back of the head.

    Seen from the back again: add the plates at the back of the head.

  17. Step 17 of 18: Add the slopes and tiles on both sides and at the back.

    Add the slopes and tiles on both sides and at the back.

  18. Step 18 of 18: Set the head on the body.

    Set the head on the body.

Parts

102 pieces in total.

  • 1 x Brick, Modified 1 x 2 with Studs on 1 Side, Orange11211
  • 3 x Slope, Curved 2 x 1 x 2/3, Orange11477
  • 2 x Slope, Curved 2 x 1 x 2/3, White11477
  • 1 x Slope, Curved 2 x 2 x 2/3, Orange15068
  • 1 x Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper), White15573
  • 1 x Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper), Orange15573
  • 2 x Tile, Round 1 x 1 Half Circle Extended, Orange24246
  • 4 x Tile, Round 1 x 1 Quarter, Orange25269
  • 4 x Plate, Round 1 x 1 with Bar Handle, Black26047
  • 2 x Brick, Modified 1 x 1 with Studs on 2 Sides, Adjacent, Black26604
  • 1 x Wedge 2 x 1 x 2/3 Right, Orange29119
  • 1 x Wedge 2 x 1 x 2/3 Left, Orange29120
  • 1 x Brick 1 x 1, Orange3005
  • 2 x Brick 1 x 1, White3005
  • 5 x Plate 1 x 2, Orange3023
  • 9 x Plate 1 x 1, Orange3024
  • 5 x Plate 1 x 1, White3024
  • 4 x Brick, Round 1 x 1, Orange3062
  • 2 x Tile 1 x 2, Orange3069
  • 4 x Tile 1 x 1, Orange3070
  • 2 x Brick, Modified 1 x 1 x 1 2/3 with Studs on Side, Orange32952
  • 1 x Brick, Modified 1 x 1 x 1 2/3 with Studs on Side, White32952
  • 1 x Brick, Round 1 x 1 x 2/3 Half Circle Extended with Stud on Side, Black3386
  • 2 x Brick, Round 1 x 1 x 2/3 Half Circle Extended with Stud on Side, White3386
  • 7 x Plate 1 x 3, Orange3623
  • 4 x Bracket 1 x 1 - 1 x 1 Inverted, Orange36840
  • 1 x Brick, Modified 1 x 1 with Headlight, White4070
  • 2 x Brick, Modified 1 x 1 with Headlight, Orange4070
  • 1 x Brick, Modified 1 x 1 with Studs on 4 Sides, White4733
  • 1 x Brick, Modified 1 x 1 with Studs on 2 Sides, Opposite, White47905
  • 2 x Slope 30 1 x 1 x 2/3, White54200
  • 8 x Slope 30 1 x 1 x 2/3, Orange54200
  • 2 x Plate, Modified 1 x 1 with Open O Clip Thick (Vertical Grip), White4085d
  • 1 x Plate, Modified 1 x 1 with Open O Clip (Horizontal Grip), Orange61252
  • 5 x Plate, Round 1 x 1, Black4073
  • 1 x Technic, Brick 1 x 1 with Hole, White6541
  • 1 x Plate, Round 1 x 1 with Bar Handle on Long Stem, White79194
  • 2 x Slope 30 1 x 2 x 2/3, Orange85984
  • 1 x Brick, Modified 1 x 1 with Stud on Side, Orange87087
  • 2 x Tile, Round 1 x 1 with Black Eye with Pupil Pattern, White98138pb007

Where to go next

Want a ready-made model? Open Editions has them to order online, with your print on them if you want it. From 20 kits, shipped within 6 weeks.

Want something designed from scratch? Custom Models.