Lemur

Published · No. 2

A small ring-tailed lemur built from LEGO® bricks, sitting up, in 13 steps and 74 pieces.

Free building instructions for small models built from LEGO® bricks.

Download the PDF

Lemur minibuild, building instructions, cover

Steps

  1. Step 1 of 13: Start with a light bluish gray 1 x 3 plate and three inverted brackets. 4 parts in this step.
  2. Step 2 of 13: Add the white feet, the inverted slopes and the curved slopes of the legs. 7 parts in this step.
  3. Step 3 of 13: Add the plates and the inverted bracket on top. 4 parts in this step.
  4. Step 4 of 13: Add the curved slopes, the tile and the 1 x 2 plates. 5 parts in this step.
  5. Step 5 of 13: Add the round plate with open studs and the round tiles at the back, where the tail goes. 3 parts in this step.
  6. Step 6 of 13: Build the ringed tail: thread the white and black round plates on the flexible whip. 15 parts in this step.
  7. Step 7 of 13: Add three 1 x 2 plates on top of the body. 3 parts in this step.
  8. Step 8 of 13: Add the bricks with a stud on the side and the curved slopes. 4 parts in this step.
  9. Step 9 of 13: Add the arms with clips, the macaroni tiles and the white curved slope of the chest. 5 parts in this step.
  10. Step 10 of 13: Add the curved arches, the tiles and the white plates. 7 parts in this step.
  11. Step 11 of 13: Start the head with the white bricks and the brackets. 5 parts in this step.
  12. Step 12 of 13: Add the ears, the top of the head and the white slopes. 6 parts in this step.
  13. Step 13 of 13: Add the eyes, the nose and the last plates of the face. 6 parts in this step.
  14. Lemur minibuild, building instructions, closing page: the WLWYB chip, a credit line for the design and the trademark notice that is also in the footer of this page.

Parts and steps as text

Everything the slides show, in words.

The steps as text
  1. Step 1 Start with a light bluish gray 1 x 3 plate and three inverted brackets. (4 parts)
  2. Step 2 Add the white feet, the inverted slopes and the curved slopes of the legs. (7 parts)
  3. Step 3 Add the plates and the inverted bracket on top. (4 parts)
  4. Step 4 Add the curved slopes, the tile and the 1 x 2 plates. (5 parts)
  5. Step 5 Add the round plate with open studs and the round tiles at the back, where the tail goes. (3 parts)
  6. Step 6 Build the ringed tail: thread the white and black round plates on the flexible whip. (15 parts)
  7. Step 7 Add three 1 x 2 plates on top of the body. (3 parts)
  8. Step 8 Add the bricks with a stud on the side and the curved slopes. (4 parts)
  9. Step 9 Add the arms with clips, the macaroni tiles and the white curved slope of the chest. (5 parts)
  10. Step 10 Add the curved arches, the tiles and the white plates. (7 parts)
  11. Step 11 Start the head with the white bricks and the brackets. (5 parts)
  12. Step 12 Add the ears, the top of the head and the white slopes. (6 parts)
  13. Step 13 Add the eyes, the nose and the last plates of the face. (6 parts)
The parts list, 74 pieces in total
  • 2 x Slope, Curved 2 x 1 x 2/3, Light Bluish Gray11477
  • 1 x Slope, Curved 2 x 2 x 2/3, Light Bluish Gray15068
  • 1 x Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper), Light Bluish Gray15573
  • 2 x Tile, Round 1 x 1 Half Circle Extended, Light Bluish Gray24246
  • 1 x Tile, Round 1 x 1 Quarter, Black25269
  • 2 x Tile, Round Corner 2 x 2 Macaroni, Light Bluish Gray27925
  • 6 x Plate 1 x 2, Light Bluish Gray3023
  • 2 x Plate 1 x 2, White3023
  • 2 x Plate 1 x 1, Light Bluish Gray3024
  • 1 x Plate 1 x 1, White3024
  • 1 x Tile 1 x 2, Light Bluish Gray3069
  • 2 x Tile 1 x 1, Light Bluish Gray3070
  • 2 x Plate, Round 1 x 2 with Open Studs, Black35480
  • 2 x Plate 1 x 3, Light Bluish Gray3623
  • 2 x Slope, Inverted 45 2 x 1, Light Bluish Gray3665
  • 1 x Bracket 1 x 1 - 1 x 1 Inverted, Light Bluish Gray36840
  • 2 x Bracket 1 x 1 - 1 x 1, Light Bluish Gray36841
  • 1 x Slope, Curved 1 x 2 with Bottom Stud Holder, Light Bluish Gray37352
  • 1 x Slope, Curved 3 x 1, White50950
  • 1 x Brick, Modified 1 x 2 with Studs on 2 Sides, White52107
  • 2 x Slope 30 1 x 1 x 2/3, White54200
  • 3 x Arch 1 x 3 x 2 Curved Top, Light Bluish Gray6005
  • 2 x Plate, Modified 1 x 2 with Bar Handle on End, White60478
  • 2 x Slope, Curved 2 x 1 x 1 1/3 with Recessed Stud, Light Bluish Gray6091
  • 2 x Plate, Modified 1 x 1 with Open O Clip (Horizontal Grip), White61252
  • 1 x Slope, Curved 1 x 1, Light Bluish Gray7126
  • 3 x Bracket 1 x 1 - 1 x 2 Inverted, Light Bluish Gray73825
  • 6 x Plate, Round 1 x 1 with Open Stud, Black85861
  • 8 x Plate, Round 1 x 1 with Open Stud, White85861
  • 3 x Brick, Modified 1 x 1 with Stud on Side, Light Bluish Gray87087
  • 1 x Minifigure, Weapon Whip Bent Flexible, Black88704
  • 2 x Tile, Round 1 x 1, Black98138
  • 1 x Tile, Round 1 x 1, White98138
  • 2 x Tile, Round 1 x 1 with Black Eye with Pupil Pattern, White98138pb007
  • 1 x Bracket 1 x 2 - 1 x 2 Inverted, White99780

Where to go next

Want a ready-made model? Open Editions has them to order online, with your print on them if you want it. From 20 kits, shipped within 6 weeks.

Want something designed from scratch? Custom Models.