Raccoon

Published · No. 27

A small raccoon built from LEGO® bricks, gray with a black mask, a white face and a striped tail, in 9 steps and 38 pieces.

Free building instructions for small models built from LEGO® bricks.

Download the PDF

Raccoon minibuild, building instructions, cover

Steps

  1. Step 1 of 9: Start the body with three light bluish gray 1 x 3 plates and two dark bluish gray round 1 x 2 plates. 5 parts in this step.
  2. Step 2 of 9: Add two dark bluish gray 1 x 1 plates and one light bluish gray 1 x 1 plate. 3 parts in this step.
  3. Step 3 of 9: Add two curved slopes with a recessed stud and the bracket at the front. 3 parts in this step.
  4. Step 4 of 9: Add two bricks with headlights. 2 parts in this step.
  5. Step 5 of 9: Add the 2 x 3 plate, the dark bluish gray brick and two black claws for the front paws. 4 parts in this step.
  6. Step 6 of 9: Build the face with two black bricks with headlights, the black brick with a stud on the side and the white 1 x 3 brick. 4 parts in this step.
  7. Step 7 of 9: Add the eyes, the black slope, a white plate and the black round plate for the nose. 5 parts in this step.
  8. Step 8 of 9: Add the ears with two small slopes and the second 2 x 3 plate on top. 3 parts in this step.
  9. Step 9 of 9: Build the striped tail from light bluish gray and black round plates and clip it on at the back. 9 parts in this step.
  10. Raccoon minibuild, building instructions, closing page: the WLWYB chip, a credit line for the design and the trademark notice that is also in the footer of this page.

Parts and steps as text

Everything the slides show, in words.

The steps as text
  1. Step 1 Start the body with three light bluish gray 1 x 3 plates and two dark bluish gray round 1 x 2 plates. (5 parts)
  2. Step 2 Add two dark bluish gray 1 x 1 plates and one light bluish gray 1 x 1 plate. (3 parts)
  3. Step 3 Add two curved slopes with a recessed stud and the bracket at the front. (3 parts)
  4. Step 4 Add two bricks with headlights. (2 parts)
  5. Step 5 Add the 2 x 3 plate, the dark bluish gray brick and two black claws for the front paws. (4 parts)
  6. Step 6 Build the face with two black bricks with headlights, the black brick with a stud on the side and the white 1 x 3 brick. (4 parts)
  7. Step 7 Add the eyes, the black slope, a white plate and the black round plate for the nose. (5 parts)
  8. Step 8 Add the ears with two small slopes and the second 2 x 3 plate on top. (3 parts)
  9. Step 9 Build the striped tail from light bluish gray and black round plates and clip it on at the back. (9 parts)
The parts list, 38 pieces in total
  • 1 x Plate, Round 1 x 1 with Bar Handle, Light Bluish Gray26047
  • 2 x Plate 2 x 3, Light Bluish Gray3021
  • 1 x Plate 1 x 1, Light Bluish Gray3024
  • 3 x Plate 1 x 3, Light Bluish Gray3623
  • 1 x Bracket 1 x 1 - 1 x 1, Light Bluish Gray36841
  • 2 x Brick, Modified 1 x 1 with Headlight, Light Bluish Gray4070
  • 4 x Plate, Round 1 x 1, Light Bluish Gray4073
  • 2 x Slope 30 1 x 1 x 2/3, Light Bluish Gray54200
  • 2 x Slope, Curved 2 x 1 x 1 1/3 with Recessed Stud, Light Bluish Gray6091
  • 1 x Plate, Modified 1 x 1 with Open O Clip (Horizontal Grip), Light Bluish Gray61252
  • 2 x Minifigure, Weapon Bladed Claw, Spread, Black10187
  • 2 x Brick, Modified 1 x 1 with Headlight, Black4070
  • 4 x Plate, Round 1 x 1, Black4073
  • 1 x Brick, Modified 1 x 1 with Stud on Side, Black87087
  • 1 x Slope 45 2 x 1 with 2/3 Cutout, Black92946
  • 1 x Brick 1 x 1, Dark Bluish Gray3005
  • 2 x Plate 1 x 1, Dark Bluish Gray3024
  • 2 x Plate, Round 1 x 2 with Open Studs, Dark Bluish Gray35480
  • 1 x Plate 1 x 1, White3024
  • 1 x Brick 1 x 3, White3622
  • 2 x Tile, Round 1 x 1 with Black Eye with Pupil Pattern, White98138pb007

Where to go next

Want a ready-made model? Open Editions has them to order online, with your print on them if you want it. From 20 kits, shipped within 6 weeks.

Want something designed from scratch? Custom Models.